|
OktavaMod MJE-K47H - link
a classic sounding
mic for everybody
When you pay a lot for a brand name
mic (that is, if you even have the money in the first
place) you are paying for a quality design, build and
components, right? For the most part that’s true.
But it is frustrating to know that you are also paying
more simply for the brand name and in some cases the vintage
of the mic, which implies a certain quality. Conversely,
you may save money on a cheap mic, but it’s even
more frustrating to hear the poor sounding results. Wouldn’t
it be great if you could just take your cheap mic to a
mic guru and have him soup it up into a super high-quality,
boutique mic? Well, that’s exactly what Michael
Joly of OktavaMod in Springfield, MA does. This boutique
service from OktavaMod is the biggest step forward for
home recordists in a long time and it’s the next
big step up for your recordings. In fact, this aftermarket
modifying and upgrading service is part of a bigger trend
in audio products that I believe will become a huge part
of the market in the next few years.
OktavaMod offers an array of awesome mods for Chinese and Russian-made
condenser and ribbon microphones, as well as selling new
modified mics. The newest product available is the first
one to be offered under the Michael Joly Editions brand
- the MJE-K47H large diaphragm capsule head for popular 22 mm small diaphragm
condenser mics (a.k.a. pencil condensers) like the MXL
603, the Nady CM95, etc. Michael Joly, President and founder
of OktavaMod, sent me one to check out and it was totally
amazing. The first thing I noticed about it was an extraordinarily
clear, balanced signal. It was notably true-to-life. Working
at a major studio I have access to many of the greatest
mics ever made, and we’re especially strong in classic
condensers. I put the MJE-K47H up against some of our
more modern classic large diaphragm condensers –
like the Neumann U 87 and the AKG 414 – and it was
every bit as rich in the bottom and even more open and
clear in the top end. In the time that I borrowed the
MJE-K47H it became one of my favorite mics and certainly
my go-to for all non-tube condenser tasks. If you’re
looking for a smooth, velvety vocal mic I would generally
go for a tube condenser. But when you need something crisp
and accurate I would go for a more modern condenser design,
and the MJE-K47H is my new favorite amongst some very
tough competition in this realm.
OktavaMod employs a K47-type capsule in the MJE-K47H,
which is modeled after the capsule used in the venerable
Neumann U 47. It mimics the original K47 characteristics
extremely closely – rich bottom, accurate mid-range,
slight presence peak and an open top end. In fact, it
tracks the original K47 capsule +/-1.5db across the operating
frequency spectrum. Michael Joly carefully sought out
a capsule manufacturer who could produce a K47-style capsule
that would meet his performance, quality control and price
specifications.
The first thing I used the MJE-K47H on
was some hand percussion objects (triangle, shaker, wood
and metal guiros), which are harmonically complex sounds
can be surprisingly difficult to capture in a recording
accurately. I often find that hand percussion can sound
thin or dull even with decent mics. Or you can sometimes
get that weird low frequency thump sound. But the MJE-K47H
delivers a beautiful sound and avoids these problems entirely.
I learned from Michael Joly that the
low-frequency thump you can hear in recording complex
sounds is caused by what’s called intermodulation
distortion. Intermodulation distortion (IM) is unlike
harmonic distortion, which you hear in overdriven guitar
amps. Harmonic distortion emphasizes harmonics present
in the signal that are higher than the fundamental frequency,
whereas IM is the sum and difference of two different
frequencies that are present in the signal.
For example, if the sound of keys jingling simultaneously
produces a tone at 1,000Hz as well as 1,200Hz the IM will
be 200Hz, which is the difference of the two tones. By
summing the two tones you emphasize the difference. So
in this example, you can be recording a high frequency
sound and the intermodulation distortion emphasizes a
lower frequency that isn’t present in the actual
sound.
That’s why using a mic with a lesser quality design,
particularly when recording complex sounds like metal
hand percussion, can cause an unpleasant low-frequency
thump that is not true-to-life. IM occurs to a lesser
extent when recording voice, for example, because voice
is a less harmonically complex sound that doesn’t
contain as many frequencies that are so close together.
But if your mic is subjected to high IM it can make for
a lower quality sound. The extremely low IM in the MJE-K47H
speaks to the high quality of its capsule and makes it
appropriate to record anything. I loved it on voice, acoustic
guitar, piano, as a drum overhead, etc. In fact, I haven’t
found anything that it doesn’t perform well on.
Another contributor to the MJE-K47H’s
open sound is the single-layer headbasket. Most microphone
headbaskets use three wire mesh grill layers, which creates
standing wave coloration within the headbasket itself.
This is totally avoided with the single-layer headbasket.
The reduced screening does open you up to plosives when
using it on vocals (from the singers breath), but that’s
easily remedied with a pop filter.
It’s great that you have the option
of buying either the Mono Kit (aluminum case, one MJE-K47H
capsule head, one shock mount and space for user-supplied
SDC and two capsules), Stereo Kit (aluminum case, two
MJE-K47 capsule heads, two shock mounts and spaces for
two user supplied SDCs and four capsules) or just the
head alone to use with any 22 mm SDC body. I was truly
blown away by this mic and it’s a tremendous value.
Find more information at www.oktavamod.com , take advantage
of the pre-order discount and check out all of their other
great mods!
|
|
"This
boutique service from OktavaMod is the biggest step
forward for home recordists in a long time and it’s
the next big step up for your recordings."

"I
put the MJE-K47H up against some of our more modern classic
large diaphragm condensers – like the Neumann U 87
and the AKG 414 – and it was every bit as rich in
the bottom and even more open and clear in the top end"
|